Occasionwear cluster
Sequin Dress Manufacturer
Sequin and metallic dress manufacturing for party and occasionwear brands — sequinned, beaded and glitter fabrics handled so the embellishment survives the seam, the press and the customer.
Capabilities
What we make
Sequin Dress manufacturing capabilities
Sequin is a material problem before it is a style problem. The fabric has no give, it blunts needles, it sheds on the sewing floor and it shows every mark and every seam. Almost every manufacturing decision on this page follows from that.
- All-over sequin and glitter fabrics
- Sequin on mesh and stretch bases
- Beaded and appliquéd panels
- Lined sequin construction
- Sequin trims on woven shells
- Low-shed finishing and packing
Constructions
What we build in this category
Each of these is developed as its own programme: its own block, its own interlining and its own sample round.
Every seam is a decision
Sequin fabric cannot be pressed open the normal way and sheds wherever it is cut. Seams are planned so the cut edge ends up enclosed, or the shed finishes inside the lining and on the customer.
Needles and thread are specified
Ballpoint needles, a heavier thread and a slower stitch rate. Skipping that is how a sequin style arrives with pulls along every seam.
Coverage is priced by area
Sequin and bead placement is quoted by the panel, not by the piece. Changing the coverage after approval is a new quotation, not an adjustment.
Inside the work
How these garments get made here
Pattern, sample, construction and material — the four stages that decide whether the finished garment matches the one you approved.
Development process
From reference to bulk in five steps
- 1
Surface and base brief
We start from the base fabric and the sequin type, because those two decide the needle, the seam plan and the pressing method.
- 2
Seam and shed planning
The construction is planned so cut edges are enclosed, and the lining is chosen to contain whatever shed remains.
- 3
Sample with the real fabric
A sequin sample is only meaningful in the production sequin. Substituting a similar cloth for the first sample wastes the round.
- 4
Approval and coverage lock
Coverage and placement are locked at approval, because beading cost and lead time are driven by area.
- 5
Production, pressing and packing
Pressing is done off the sequin surface and the garments are packed to protect the embellishment in transit.
Technical & buyer information
What we can tell you now
Verified facts are published. Anything that depends on the construction is confirmed against your specification rather than quoted as a headline number.
| Facility | Factory-direct OEM & ODM |
|---|---|
| Facility certifications | ISO 9001 · OEKO-TEX STANDARD 100 · amfori BSCI-audited · SGS-inspected |
| Quotation response | within 24 hours |
| Minimum order quantity | Confirmed per style, colour, fabric and construction — corsetry, hand beading, sequins and special dyeing each carry their own minimum. |
| Sample lead time | 7–10 days |
| Sample fee | Confirmed at quotation |
| Bulk production lead time | Confirmed after sample and material review — corsetry, hand beading, sequins and special dyeing each change the production window. |
| Inspection standard | Six-step inspection (material → cutting → sewing → finishing → pressing → final AQL) |
Typical questions we ask
- Is the sequin all-over, or placed on a panel?
- Does the base stretch? Sequin on mesh behaves differently from sequin on woven.
- What level of shed is acceptable at goods-in?
Develop in this category
Send a reference, a sketch or a tech pack. We reply with a quotation and a sample plan, within 24 hours.
The cluster
Other occasionwear categories
Occasionwear is split by occasion on purpose: a prom buyer and a rental buyer need different constructions, different grading and different finishing. The pages below each own one of those briefs.
Occasionwear Manufacturer
Special-occasion manufacturing across evening, prom, bridesmaid, gala and cocktail constructions.
Evening Dress Manufacturer
Evening gown development in satin, crepe, chiffon, lace and sequin constructions.
Prom Dress Manufacturer
Prom and ball-gown production with corseted and boned bodices in full size runs.
Bridesmaid Dress Manufacturer
Coordinated bridesmaid ranges in matched colourways and graded size runs.
Private Label Occasionwear Manufacturer
Your label on occasionwear — development, production, labelling and packaging.
Reading
Related guides
Where the construction detail behind this page is written out in full.
How Sequin Dresses Are Manufactured
The four production routes behind a sequin dress — pre-sequinned fabric, all-over and placement embroidery, and hand application — plus what happens at the seam.
Hand Embellishment in Womenswear
Hand embellishment as a production stage: how the techniques differ, how an embellishment artwork is specified, attachment testing, and why handwork competes with itself.
Garment Quality Control Checklist
A six-stage quality control checklist in production order: what each check catches, what it cannot catch, and why the same defect costs multiples more when it is found at the end.
Common Dress Manufacturing Defects
The dress defects that recur most often, their real root causes upstream of the sewing line, and why a symptom fix on one order leaves the fault in place for the next.
Before Bulk Production
A 40-point factory checklist for B2B buyers before bulk begins: pre-production, fabric, sizing, production setup and shipping. Save it, print it, use it.
Start a project
Have a style, a reference or just a category?
Send whichever you have. We will tell you which route fits it, what the sampling looks like and what the minimum is for that construction.